AIR CONDITIONING
TUNE UP YOUR A/C!
Don’t worry about your heating or cooling, you have better things to do! Take a nap or spend time with the kids. Give us a call and we will take care of required maintenance on your HVAC units.
Spring is the perfect time to have your service professional from Mr Breeze Heating and Cooling perform the necessary maintenance on your home’s air conditioning system. Cleaning, checking and testing your system before the hot weather arrives ensures reliable service, peak performance and maximum longevity from your system. Remember, a low refrigerant charge or dirty equipment could cost you a lot of extra money in utilities and shorten the life of your system.
Outdoor Unit Maintenance Included Services:
- Clean Condenser Coil
- Check Entering Air Temp
- Check Discharge Air Temp
- Check Liquid Line Temp
- Check Liquid Line Pressure
- Calculate Sub-Cooling Value
- Check Suction Line Temp
- Check Suction Line Pressure
- Calculate Super-Heat Value
- Check Amperage Draw of Compressor
- Check Amperage Draw of Condenser Fan Motor
- Check All Wiring Connections
- Inspect Contactor and Capacitor(s)
- Inspect Suction Line Insulation
- Lubricate Motors (If Applicable)
Indoor Unit Maintenance Included Services:
- Check Indoor Wet-Bulb Temp
- Check Return Air Dry-Bulb Temp
- Check Supply Air Dry-Bulb Temp
- Calculate Temp Drop Across Coil
- Check Blower Motor Amperage Draw
- Inspect/Clean Condensate Drain
- Inspect Duct for Leaks
- Check Belt (If Applicable)
- Inspect Thermostat
- Replace Filter(s)
FURNACES, HEAT PUMPS, GEOTHERMAL
PREPARE FOR WINTER!
Fall to wintertime is the perfect time to have your service professional from Mr Breeze Heating and Cooling perform the necessary maintenance on your home’s heating system. Cleaning, checking and testing your system before the hot weather arrives ensures reliable service, peak performance and maximum safety from your system.
Furnace Maintenance Included Services:
- Inspect Flue Connection
- Inspect Burners
- Inspect Burner Chamber
- Inspect Pilot (If Applicable)
- Inspect Ignitor
- Check Ignition
- Check Burn Pattern and Color
- Check and Clean Flame Sensor (If Applicable)
- Check All Electrical Connections
- Check Amperage Draw of Blower Motor
- Check Amperage Draw of Inducer Motor
- Check and Clean Condensate Drain
- Check Return Air Temperature
- Check Supply Air Temperature
- Verify Temp Rise Is Within Manufacturers Specs
- Inspect Duct for leaks
- Check Belt If Applicable
- Inspect Thermostat
- Replace Filter(s)
- Turn on Humidifier (Pad Replacement Available for Most Common Humidifiers)
- Perform Carbon-Monoxide Test
